Kvaser Memorator R SemiPro User’s Guide
8 (33)
•
Power is taken from the CAN bus or from the USB bus. The device
automatically switches power supply between the CAN (primary) and the
USB (secondary), reducing power drain on a laptop’s battery.
•
Small, light aluminum housing with approximate dimensions
31 x 220 x 19 mm (1.2 x 8.7 x 0.8 inches; W x L x H) – easy to tuck away
(e.g. in a vehicle during a test drive).
•
The CAN cable is 40 cm (16 inches).
•
The USB cable is 10 cm (4 inches).
2.3
CAN logger Functions
•
One fixed 4GB memory card.
•
Built-in real time (calendar) clock with battery backup.
•
Easy to use graphic configuration tool.
•
Logger status is indicated with five externally visible LEDs.
•
Supports silent mode – you can log bus traffic without interfering with it.
•
Handles 100% bus load at 1 Mbit/s with two channels (>20000 messages per
second).
•
Short start up time.
•
Upload logged data via USB at 1.2 MB/s when connected via USB 2.0
HiSpeed.
•
External trigger input (e.g. pushbutton).
•
External trigger output (e.g. a LED or buzzer).
•
Pretrigger space is limited by available disk space only.
•
Select trigger signals from a CAN database, or define them directly in Kvaser
Memorator Tools.
2.4
Real time CAN-USB interface
•
Uses USB 2.0 HiSpeed, while maintaining compatibility with USB 1.x
computers.
•
Supports extreme data throughput, quick reaction times and precise time
stamping – removing any bottlenecks. Handles up to 40000 messages per
second.
•
Kvaser MagiSync – automatic time synchronization between all Kvaser
products that uses the Kvaser MagiSync feature.
•
Supports silent mode for analyzing tools – listen to the bus without interfering
with it.
•
Simultaneous operation of multiple devices.
•
Power supplied through the CAN bus interface or through the USB interface.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
