Kvaser Memorator R SemiPro User’s Guide
15 (33)
•
If the trigger is configured to react to a falling edge, the trigger is activated
when pin 4 is connected to ground.
•
If the trigger is configured to react to a rising edge, the trigger is activated
when pin 4 is disconnected from ground.
Figure 3: The trigger input inside the Kvaser Memorator R SemiPro
The trigger input is debounced by the firmware. A pulse must
have a minimum duration of approximately 30 ms to be detected.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
