Kvaser Memorator R SemiPro User’s Guide
25 (33)
small application opens where you should see the device listed if correctly
connected to your PC (see Figure 9 on Page 25). Select the device to program and
click the Next button.
Figure 9: Firmware update, select device
Click on the
Start Upgrade
button to start programming (see Figure 10 on
Page 26). The programming takes approximately 20 seconds. The progress is
printed on the screen, and typically looks like Figure 10 on Page 26.
No error messages should appear.
If you see error messages,
try to disconnect and reconnect the device, and then perform the
operation again.
To verify that the firmware is updated, double-click on “Kvaser Device Guide” in the
Control Panel. Select “Kvaser Memorator R SemiPro” in the tree view to the left,
and click on either channel. The firmware revision information appears in the right
half of the window.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
