Kval 990-HQ, Service Manual

Page: 74 / 112

Replacing Tooling in the Front Section
3-36
990-HQ Service Manual
.
5.
Move the Six-Shooter assembly away from the machine-it will move about 1½ inch.
This provides room for hands to access the screwdriver bit holders.
6.
To remove screwdriver bit, push the bit holder (see images) back toward the Six-
Shooter assembly and hold: pull bit out of holder.
Remove Driver Bits
Bit Holder
Lock
Bit
Slide Bit
Holder lock
Back
Slide Bit Out
7.
To insert screwdriver bit, push bit holder back toward Six-Shooter assembly and
hold while inserting new bit. Release holder to secure bit.
8.
Move Six-Shooter assembly back toward machine and pull the back slide toward
you; then move assembly away from machine to restore assembly to original start-
ing position