SECTION 7—OPERATION
7.7
7.2.2 FASTEST MODE STATIONARY OPERATION
1.
The Fastest vehicle operation is toggled on / off, by the
FAST switch on the remote control. When the fastest
mode is activated, “FAST” will be displayed above the
FAST area.
2.
When a fastest vehicle is detected, the FAST area will
display the speed of the fastest vehicle and the arrow
symbol above the FAST area will display the direction
the fastest vehicle is traveling. (The primary target area
will continue to display the speed of the strongest target
vehicle.)
NOTE: This is especially useful in traffic situations such
as a small vehicle overtaking a larger truck. In
the FASTEST mode, as in normal radar
operation, a good tracking history is essential.
3.
The operator may lock the fastest speed by depressing
the LOCK switch while a fastest speed is displayed.
The strongest speed may be locked by depressing the
LOCK switch when only the strongest speed (no fastest
speed) is being displayed.
4.
When the speed is locked, a short alert tone will be
heard. The label above the FAST / LOCK area will
change to “LOCK”, and the locked target speed will be
displayed in the LOCK area.
If the fastest vehicle's speed was locked, the primary
Target area will display the current fastest target (for
track-through-lock history), and the message area will
display “FAST TRACKING”. When there is no target
being tracked, the message area will display “FAST
LOCKED” to indicate the locked speed was obtained as
a fastest speed.
