KUHN RW1600 Operation Manual Download Page 30

Page: 30 / 102

Hitching the machine

Installation cable

control

Check correct lying of the cables

Cables may not get stretched or get trapped. Take care of sufficient
free space. Torn or trapped cables can lead to unpredictable
movements of the machine and can lead to serious damages and
injuries.

The cable control must be installed on a support or holder in the tractor
cab.

Take care of the following:

•

Ensure the cable control is installed in good manual and visible
reach of the operator

•

Do not mount the cable control onto a part that is subject to strong
vibrations

•

Ensure the cable control is in an area with less dust

•

Avoid sharp bends in the cables

Connection

> Place the cable control at the tractor

Rotation and bale

counter

The rotation and bale counter must be mounted.

Cable control

Rotation and

bale counter

Summary of Contents for RW1600







































































































Search results

Summary of Contents for RW1600

Reviews:

Related manuals for RW1600

Brands by name

Popular brands

KUHN RW1600, Operation Manual

Search results

Summary of Contents for RW1600

Reviews:

Related manuals for RW1600

Brands by name

Popular brands