62
Joystick control
Parameter
settings
Via the parameter settings, the entire wrapping process is prescribed.
CYK
The current number of table laps can be set. The pre-set number of
table laps can be shown in the display.
> Push F2 to enter the display CYK
> Push and hold F1 until the current number of table laps flashes
> Push joystick forward or backward to set the last digit
> Push joystick left or right to enter the first digit
> Push joystick forward or backward to set the first digit
> Push F2 to confirm
BAL
The number of bales wrapped can be shown in the display. The
number of bales wrapped can be reset to zero.
> Push F2 to enter the display BAL
> Push and hold F1 until the number of bales wrapped flashes
> Push F3 to reset the number of bales wrapped to zero
> Push F2 to confirm
F2
F3
F1
Number Recommended number
2 - 99
→
Film wrap recommendations, page 49
F2
F3
F1
Number
0 - 99999
