68
Electronic control system
Control mode
The electronic control system can be used in the following control
modes:
•
manual mode
•
semi-automatic mode
•
automatic mode
The set of parameters determines working in semi-automatic or
automatic mode.
Manual mode
In manual mode, the wrapping cycle is controlled by the toggle
switches and the joystick.
> Push to select manual mode
Depending on the requested action
> Push the concerning toggle switches or joystick on the control box
Semi-automatic
mode
Semi-automatic mode offers the possibility for the following:
•
to stop the table before film wrapping starts
•
to stop before bale unloading
•
to wrap the pre-set number of wraps
•
to unload the bale automatically
> Push to select semi-automatic mode
When one or more of the above-mentioned adjustments are selected,
the wrapping cycle will stop at the concerning point(s).
> Push to set the desired parameter
> Push to continue wrapping
