Preparation for use
41
Film installation
Before installing the film:
> switch off the tractor engine
> remove the ignition key
Stay clear of pre-stretcher rollers
Stay clear of the pre-stretcher rollers. Hands can be squeezed
between the rollers. Personal injuries can occur.
Choose a good quality of film in order to ensure troublefree functioning
of the film wrap system. Recommended is
→
Film requirement, page 24
Loading the film roll
> Move the lower lever to secure the pre-stretcher with the hook
> Release and lift the upper lever
In case a 500-mm film roll is used:
> Place an adapter [+] on top of the film roll
> Place a film roll
> Lower the upper lever
> Guide the film between the pre-stretcher, according to the scheme
> Move the lower lever to unsecure the pre-stretcher from the hook
> Connect the end of the film to the applicutter
Electronic control only:
> Push at the same time for a counter/programme reset
Upper
lever
Hook
Lower
lever
Pre-
stretcher
