KUHN MERGE MAXX 950 Operator'S Manual Download Page 58

Page: 58 / 124

MERGE MAXX 950

7. - Instructions for transport

KN233BGB_C

Merger

7. Instructions for transport

7.1

Putting the machine into
transport position

Before placing the machine into transport
position:

- Wait until the rotating parts have come to a

complete stop.

- Check that nobody is within the machine

pivoting area.

- If there is someone, make sure the person

moves away.

The hydraulic functions are controlled using
the AT10 terminal (Menu «Folding /
Unfolding»).

Do not fold the machine as from the following
screens:

• Operating data.
• Adjustments.
• Diagnostics.

- In order to activate the sensor monitoring,

fold the machine as from the work screen.

Summary of Contents for MERGE MAXX 950





























































































































Search results

Summary of Contents for MERGE MAXX 950

Reviews:

Related manuals for MERGE MAXX 950

Brands by name

Popular brands

KUHN MERGE MAXX 950, Operator'S Manual

Search results

Summary of Contents for MERGE MAXX 950

Reviews:

Related manuals for MERGE MAXX 950

Brands by name

Popular brands