KUHN MERGE MAXX 950 Operator'S Manual Download Page 32

Page: 32 / 124

MERGE MAXX 950

4. - Safety

KN233BGB_C

Merger

4.4.2 Instructions specific to France



Coupling device (1)

- Couple the machine to a tractor that is equipped

with a system for locking the lift arms laterally and
vertically.

- To drive on roads, respect the attachment height

specified in the operator's manual and lock the lift
linkage.



Speed

- Respect the maximum authorized speed of 25 kph

(15 mph) to travel on public roads with this tractor-
machine unit.

4.4.3 Specific recommendations for the

European Union

For machines with European approval:

- Couple the machine to a tractor that is equipped

with a system for locking the lift arms laterally and
vertically.

- To drive on roads, respect the attachment height

specified in the operator's manual and lock the lift
linkage.

Summary of Contents for MERGE MAXX 950





























































































































Search results

Summary of Contents for MERGE MAXX 950

Reviews:

Related manuals for MERGE MAXX 950

Brands by name

Popular brands

KUHN MERGE MAXX 950, Operator'S Manual

Search results

Summary of Contents for MERGE MAXX 950

Reviews:

Related manuals for MERGE MAXX 950

Brands by name

Popular brands