KUHN MERGE MAXX 950 Operator'S Manual Download Page 19

Page: 19 / 124

4. - Safety

MERGE MAXX 950

KN233BGB_C

Merger

4.2.8 Precautions when coupling

- Before attaching the machine, make sure that it

cannot accidentally start moving (chock the
wheels) and that the parking stand is in the right
position.

- The machine must only be attached to the hitch

points provided for this purpose.

- Do not stand between the machine lower hitching

points or between the tractor lower hitching points
during coupling maneuvers.

- Never stand between the tractor and the machine

when operating the three point linkage.

- Do not stand between the machine and the tractor

or on the machine without having first applied the
tractor parking brake and placed the gearbox in the
neutral position.

Summary of Contents for MERGE MAXX 950





























































































































Search results

Summary of Contents for MERGE MAXX 950

Reviews:

Related manuals for MERGE MAXX 950

Brands by name

Popular brands

KUHN MERGE MAXX 950, Operator'S Manual

Search results

Summary of Contents for MERGE MAXX 950

Reviews:

Related manuals for MERGE MAXX 950

Brands by name

Popular brands