KUHN GMD 600 G II, Assembly & Operators Manual

Page: 13 / 48

- 11 -
Number of discs 6 7 8
Width of cut 2.40 m / 7' 10" 2.80 m / 9' 2" 3.10 m / 10' 2"
PTO power requirement 31 kW (42 hp) 37 kW (50 hp) 41 kW (56 hp)
P.TO. speed (rotational frequency) 540 rpm (min
-1
) 540 rpm (min
-1
) 540 rpm (min
-1
)
Disc speed (rotational frequency) 2986 rpm (min -1 ) 2986 rpm (min -1 ) 2986 rpm (min -1 )
Width in transport position *0.17 m (7") wider than tractor width
Lift system **hydraulic **hydraulic **hydraulic
Weight (approx.) :
- GMD 600 GII / 700 GII / 800 GII
535 kg / 1177 lbs 567 kg / 1247 lbs 646 kg / 1421 lbs
- GMD 600 GII- HD/700 GII- HD/800 GII- HD
548 kg / 1206 lbs 582 kg / 1280 lbs 663 kg / 1459 lbs
Bevel gearbox oil capacity 0.45 l / 1 US pint
Oil quality : SAE 80 W EP (GL4) 0.75 Imp pint
Cutterbar oil capacity 2.00 l / 4.25 US pint 2.25 l / 4.75 US pint
Oil quality : SAE 80 W EP (GL4) 3.5 Imp pint 4 Imp pint
* Applicable if machine is attached in such a way that a 5 cm / 2" distance "A" is respected (see page 18).
** On tractor side a single acting outlet (preferably with free floating position) is required.
ASSEMBLY
To facilitate shipping of the disc mowers, certain parts or assemblies are partially disassembled to reduce bulk. To
assemble these parts proceed as follows :
TYPE
GMD 600
GII
GMD 700
GII
GMD 800
GII
GMD 600
GII
-HD GMD 700
GII
-HD GMD 800
GII
-HD
TECHNICAL SPECIFICATIONS
1. Fitting the break-away latch
Fit break-away latch (P) on headstock yoke (Q) and
main frame yoke (R) with 2 pins (S) and 4 roll pins (T)
(dia. 6 x 36) as shown in photo 1.
*0.21 m (8") wider
than tractor width
1