- 4 -
18.
Never leave the tractor seat while the machine is operating.
19.
Drive speed must be adapted to ground conditions as well as roads and paths.
Always avoid abrupt changes of direction.
20.
Precision steering, tractor adherence, road holding and efficient braking are influenced by the type of
implement, weight, ballast of front axle, ground or road conditions. It is therefore of utmost importance to be
cautious in every given situation.
21.
Be particularly cautious when turning corners, paying attention to machine overhang, length, height and weight.
22.
Before operating the machine, ensure that all safety guards are firmly in place and in good condition. If worn
or damaged, replace immediately.
23.
Before operating the machine, check tightness of nuts and bolts, particularly on tool fixing elements (blades,
tines, knives, spades ...). Retighten if necessary.
24.
Keep clear of the machine operating area.
25.
WARNING ! Danger of crushing and shearing can exist when components are operated by hydraulic or
pneumatic controls.
26.
Before leaving the tractor or before adjusting, maintaining or repairing the machine, turn off the engine, remove
ignition key and wait until all moving parts have come to a complete stop.
27.
Do not stand between the tractor and the machine unless the hand brake is tight and/or stops have been placed
under the wheels.
28.
Before any adjustments, maintenance or repairs are carried out, ensure that the machine cannot be started
up accidentally.
ATTACHMENT
1. When attaching or removing the machine from the tractor, position hydraulic lift control lever in such a way that
it cannot be set off accidentally.
2. When attaching the machine to tractor 3-point linkage, ensure that diameter of link pins corresponds to diameter
of ball joints.
3. WARNING ! Danger of crushing and shearing can exist in the lifting zone of the 3-point linkage !
4. Do not stand between the tractor and the machine when operating the outer control lever of the lift mechanism.
5. In transport, the machine lift mechanism should be stabilized by tractor tie rods to avoid floatation and side
shifting.
6. When transporting the machine in the raised position, lock the lift control lever in place.
7. Do not operate the machine with narrow wheeltrack tractors when working or transporting on uneven or sloping
terrain.
Summary of Contents for GMD 600 G II
Page 11: ...9 2 3 4 5 6...
Page 12: ...10 8 7...
