- 27 -
PARKING THE MACHINE
FOR YOUR SAFETY : ALWAYS PARK THE MACHINE WITH THE CUTTERBAR IN THE
HORIZONTAL POSITION.
Do not allow the cutterbar to lower
below horizontal when setting it in
parking position (photo A).
- Using the mower hydraulic cylinder, lower the cutterbar into the horizontal position.
- Release the parking latch (L) (see arrow) (photo 35) and engage it behind the bevel gearbox mounting
plate (R) (photo 35 A). Make sure no foreign material is located on top of the bevel gearbox.
- Release the 3-point lift valve to lower the machine to the ground.
- Remove the top hitch pin from the headstock and disconnect the hydraulic hose.
- Then disconnect the lower tractor draught arms and the PTO transmission shaft.
- Place the PTO shaft (T) into the support (U) as shown in photo 36.
3 5
35A
3 6
A
Summary of Contents for GMD 600 G II
Page 11: ...9 2 3 4 5 6...
Page 12: ...10 8 7...
