KUHN GF 5001 MH, Assembly And Operators Manual

Page: 26 / 36

- 24 -
LUBRICATION
The drive gearbox is filled with SHELL Multi-Purpose
grease NLG
I
grade 2 (capacity : 0,8 kg). Check the
amount once a year by removing the rear cover (J)
(photo 1 A, page 12).
Lubricate the following points with SHELL OIL
:
- Once a week : the four wheel position locks (P) and
eccentrics (E) (photo 27), the pendulum arm lock, the
hydraulic cylinder pins.
TO ENSURE TROUBLE FREE OPERATION OF
YOUR MACHINE, WE RECOMMEND SHELL
LUBRICANTS.
Grease the following points with SHELL Multi-
Purpose grease NLG
I
grade 2 :
- Once a day : PTO yoke bearings and drive tubes.
- Once a week : The four roors (R) (photo 25),
pendulum arm, vertical 3-point frame pivot pin, pins
(F), fingers of DIGIDRIVE couplings (I) (photo 26), the
four wheel axles (U, photo 27), the four levers (A,
photo 27) and all other pivoting points of the ma-
chine.
- Once a year : The four rotor gearboxes (G) (photo
26).