KUHN GF 5001 MH, Assembly And Operators Manual

Page: 25 / 36

- 23 -
PARKING THE MACHINE
The 3-point frame is provided with a parking stand (D) to allow this machine to be parked whether in its transport
or working position (photo 24). PTO shaft (T) should be positioned in its support (S) to avoid ground contact which
could result in premature failure due to contamination with dirt and dust (photo 24).
Put male coupling of the hydraulic hose (F) into its parking support (H) (photo 24).
If ever the GF 5001 MH is to be parked whilst in its transport position, an area must be used
where the ground is very even and level. Wedges must always be placed under the 2central
wheels (photo 24).
24