KUHN GF 5001 MH, Assembly And Operators Manual

Page: 18 / 36

- 16 -
10) Fitting the safety guards (photos 10 and 10 A)
The safety guards are provided with the machine to give improved protection against possible accidents and therefore
ensure maximum safety.
Fit both guards (6) onto support (7) and secure them with 4 hexagon bolts (8) (M 10 x 50) and nuts (M 10) (photo
10). Torque to 5 daNm / 37 ft.lbs.
Side guards (5) are fitted to outside housings (11) using 2 hexagonal bolts (1) (M 12 x 60) and 2 serrated washers
(M 12) (photo 10 A).
Tighten hexagon bolts to 9 daNm / 65 ft.lbs.
Install plugs (3) and (4) on the safety guards (5 and 6).
10A 10