KUHN GF 5001 MH, Assembly And Operators Manual

Page: 19 / 36

- 17 -
ATTACHMENT
FITTING TO THE TRACTOR
The GF 5001 MH can be fitted to all tractors equipped with a DIN or ASEA Standard 3-point linkage. The lower
link pins are 22 mm and 28 mm diameter for tractors with Cat. I and II linkage. The lower link pins should be attached
to the tractor link arms (P) inside the 3-point frame for Cat. I tractors and on the outside for Cat. II tractors. In the
latter case, use the 25 mm diameter link pins to attach tractor top link (Q) to the pendulum arm (A) (photo 11).
Attachment should be undertaken with the pendulum arm (A) unlocked (lever V in the lower position, photo 12).
The pendulum arm has three attachment positions to suit varying tractor top link lengths.
Connect hydraulic hose (R) to a female hydraulic connection at the rear of the tractor (photo 11).
When the machine is attached to the tractor, raise stand (D) and secure with spring cotter (O) (photos 11 and 12).
When connecting hydraulic hose (E) to tractor, ensure hose is placed above central guard (S)
(photos 11 and 12).
11
12