KUHN GF 5001 MH, Assembly And Operators Manual

Page: 29 / 36

- 27 -
- At the front of the machine, connect the electric
harness to the hydraulic flexible tube with 3 clamp
collars (C) (length 176 mm) (photo 34),
- Attach support (P) of plug (O) to the 3-point
pendulum arm guard with 2 hexagon screws (H) (M
6 x 30) and 2 self-locking nuts (M 6) as shown in
photo 34.
For the lighting equipment to function, a 7 pin socket
is required at the rear of the tractor. Place plug (O) in
support (P) when detaching machine from tractor
(photo 34).
4) DAMPER EQUIPMENT (Kit No. 112 6270)
This equipment is recommended when working on hilly or irregular grounds as it dampens the movement of
positioning the machine in line with the centre of the tractor when raising the 3-point lift.
To fit the “ damper ” kit, refer to the fitting instructions no 088 801 01 delivered with the kit.