EL162
80
9. - Optional equipment
KN146AGB_L
Cultiplow
Adjusting the distance between wheels:
- Lift the machine slightly off the ground.
- Loosen screw (1).
- Slide the unit to position the wheel in line with the
tractor wheel track.
- Tighten bolt (1):
• Torque: 8.5 daNm (63 lbf ft).
- Proceed the same way on the other side.
- Check that distance between guards is
below : 60 mm (2’’).
- Readjust if necessary.
9.2.2 Machine use
If the machine is fitted with front wheels combined to
a roller or rear wheels:
Transport position
Attach top link to round hole (1) of the machine top
hitch pin.
Working position
- Attach the top link in the oblong hole (2) using the
machine's top link pin.
On level ground, the hitch pin must be positioned
approximately in the middle of the oblong hole.
It is forbidden to use the oblong hole for
transport.
1
1
2
Summary of Contents for EL162
Page 2: ......
