EL162
76
8. - Instructions for work
KN146AGB_L
Cultiplow
8.3.1 Rear wheels
The rear wheels can be positioned on the inside for
working on field edges (a):
- In this case, move rear wheel scraper (b):
• Remove bolt (1) and nut (2).
• Position rear wheel scraper towards the front (b).
• Reinstall bolt (1) and nut (2).
- Remove lynch pin (1) and washer (2).
- Pivot rear wheel around vertical pin (3).
- Reinstall washer (2).
- Insert and lock lynch pin (1).
- Proceed the same way on the other side.
8.3.2 Drive speed
Groundspeed must be adapted to the encountered
working conditions.
2
1
a
b
1
2
3
- Reduce groundspeed in difficult working
conditions.
Summary of Contents for EL162
Page 2: ......
