EL162
62
8. - Instructions for work
KN146AGB_L
Cultiplow
Working depth adjustment
- Lift the machine using the tractor's lift linkage.
-
Position pins in adjustment plate holes that
correspond to the required setting.
- Adjust both sides to the same setting.
Relations between the working depth and the
position of the roller:
• (a) minimum: 80 mm (3’’) (approximately).
• (b) max. : 250 mm (9.8’’) (approximately).
When the roller is not used:
- Raise the roller.
- Put the pin (1) in the hole (2).
a
b
1
2
Summary of Contents for EL162
Page 2: ......
