9. - Optional equipment
EL162
83
KN146AGB_L
Cultiplow
9.4
Skids
This equipment adjusts and controls machine
working depth.
Skids can be fitted:
• On machines fitted with a roller.
• On machines fitted with a Cultirotor rotor and
without roller.
9.4.1 Uncoupling the machine
- Lower parking stand to stabilize the machine.
9.4.2 Working depth adjustment
The working depth is set by the skid height:
- Lift the machine slightly off the ground.
- Loosen nut (1).
- Remove nut (2), washers and screw.
- Position skid in hole corresponding to the required
adjustment.
- Fit nut (2), washers and screw.
- Tighten nuts (1) and (2):
• Torque: 21 daNm (155 lbf ft).
- Proceed the same way on the other side.
2
1
Summary of Contents for EL162
Page 2: ......
