EL162
44
6. - Putting into service
KN146AGB_L
Cultiplow
6.1.3 Preparing the machine
Positioning of lower coupling yokes
The lower coupling yokes can be placed in 2
different positions:
Set back position (a): Allows to bring the machine's
centre of gravity closer to the tractor when the power
harrow is used in combination with an additional
machine.
Forward position (b): Prevents interference risks
with tractor wheels when fitting certain optional
equipment.
Adjustment
- Remove roll pins (1).
- Remove pins (2).
- Fit lower coupling yoke (3) in the required position.
- Insert pins (2).
- Insert roll pins (1) to lock pins.
- Proceed the same way on the other side.
The machine is supplied with lower coupling
yokes fitted in position (a).
- Check that the 2 lower links have been
adjusted identically.
a
b
2
3
2
1
Summary of Contents for EL162
Page 2: ......
