KUHN ALTOR 4560, Operator'S Manual

Page: 95 / 98

Limited warranty
Silo unloader - Straw Spreader
ALTOR 4560
93
$ Limited warranty
"KUHN-AUDUREAU S.A. B.P. 19, 85260 LA COPECHAGNIERE, FRANCE (hereinafter called ""the
Company"") warrants, in accordance with the provisions below, to each original retail purchaser of new KUHN
equipment of its own manufacture from an authorized KUHN dealer, that such equipment is, at the time of
delivery to such purchaser, free from defects in material and workmanship, providing the machine is used and
serviced in accordance with the recommendations in the Operator's manual".
This Limited Warranty covers the equipment for a period of one year starting from the date the equipment is
delivered to the retail purchaser and during this period up to a limit of 500 hours of use.
The date of invoice to the retail purchaser and the registration of the machine by the dealer are taken as
evidence of delivery of the machine.
This Limited Warranty covers the reimbursement (or repair) of components as well as labor charges incurred,
based on the Company warranty labor rate and allowable time for repair.
„ These conditions are subject to the following exceptions:
- Parts of the machine which are not of KUHN manufacture, such as tires, PTO shafts, slip clutches, hydraulic
jacks, etc. are not covered by the KUHN Limited Warranty, but are subject to the warranty of the original
manufacturer.
- Warranty claims related to these types of parts must be handled in the same way as if they were parts
manufactured by KUHN. However, compensation will be paid in accordance with the warranty agreement of
the manufacturer concerned, in as much as the latter justifies such a claim.
- Obviously, this Warranty does not apply to failure through normal wear and tear, to damage resulting from
negligence or to faulty surveillance, to wrong use, to lack of maintenance and/or if the machine has been
involved in an accident, lent out or used for purposes other than which it was intended by the Company.
- This Limited Warranty will not apply to any product that is altered or modified in any way without the express
permission of the Company, or if parts not made by Kuhn are used on a machine sold by the Company and/or
if repairs have been carried out by anyone other than Authorized Service Dealers.
- The Company shall not be responsible for any damage to the machine or its equipment in transit or handling
by any common carrier, within or without the Warranty period.
- The Company cannot be held responsible for any claims or accidents to the owner or to any third party, nor
to any resulting responsibility.
- In the same way, the Company cannot be held responsible for paying an indemnity for whatever reason in
the case of loss of anticipated profits or of any prejudice due to a failing, a hidden fault or breakdown of the
machine.
„ The customer will be responsible for and bear the costs of:
- Normal maintenance of the material, i.e. greasing, maintenance of oil levels, minor adjustments, etc.
- Labor charges due to removing and replacing the faulty part(s) or, as applicable, the adjustment of the new
replacement part(s).
- Dealer travel time, or traveling costs to and from the machine.
- Transporting machines, equipment or parts to the repair site and returning them to the user site.
- Parts defined as normal wearing items, such as belts, blades, forks, disks, knives, spades, tines, slip clutches,
etc. that are not covered by the Warranty.