KUHN ALTOR 4560, Operator'S Manual

Page: 70 / 98

Silo unloader - Straw Spreader
68
ALTOR 4560
Optional equipment
.
- Start the tractor, then gradually engage the power
take-off until the pump turns.
- Check that all machine functions are operational.
Make sure the pump flanges and various hydraulic
connections are tight.
- With the gear lever, the hydraulic unit can be used in
three ways:
• In neutral, without engaging the blower, for all
loading operations.
• At a blower speed of 270 min
-1
for distribution.
• At a blower speed of 540 min
-1
for straw feeding.
Maintenance
- Follow the safety regulations concerning machine
servicing.
- Check the oil level in the tank periodically. The oil level
must not fall below the upper 1/3 on the indicator.
- Change the hydraulic oil every 1500 hours.
- Replace the filter cartridge after the first 50 hours of
operation, then every 500 hours. For that purpose::
• Unscrew the cap.
• Take the filter handle and remove the filter-bowl
unit.
• To remove the filter:Turn the handle a quarter turn
anticlockwise and remove the filter from its
cartridge.
• Clean the bowl.
• Put in a new filter and lock its position, turning it a
quarter turn clockwise.
• Replace the cap and reposition the seal properly to
ensure tightness.
Under no circumstances must you use the
tractor power take-off 1000 min
-1
.