KUHN ALTOR 4560, Operator'S Manual

Page: 35 / 98

Putting into service
Silo unloader - Straw Spreader
ALTOR 4560
33
„
Electrical controls for optional equipment
Mixing hopper controls
Mixing screw rotation (J)
The lever is at top right, the conveyor-bale separator is
running alone in forward gear.
The lever is at bottom right, the conveyor-bale separator
is running alone in reverse.
The lever is at bottom left, the conveyor-bale separator
is running in reverse and the mixing screw is working.
The lever is at center left, the mixing screw is running
alone.
The lever is at top left, the conveyor-bale separator is
running in forward gear and the mixing screw is working
Adjusting the injection speed (K)
The speed is adjusted by a knob graduated from 0 to 10.
Position 0 is for 0 injection screw speed.
The output at the injection screw exit is not
absolutely proportional to the graduation.
Calibration by product type may be necessary.
See the mixing hopper instructions supplied with
the machine.