KUHN ALTOR 4560, Operator'S Manual

Page: 89 / 98

Maintenance and storage
Silo unloader - Straw Spreader
ALTOR 4560
87
10. Storage
If the machine is not to be used for a long period, prepare
it for storage:
- Clean the body (inside, outside and underside).
- Remove any product build-up.
- Repaint any surface in danger of rusting with a special
paint.
- Grease the underbody.
- Push the cylinder rods in to the maximum to protect
them from humidity and dust.
- Clean all the greasing points and joints and grease
them.
- Park the machine under a shelter on blocks to isolate
it from damp ground.
- Check the tire pressure and that the studs are
tightened.
- Check that the conveyor is slack.
Do not clean the cylinder rods with a
pressurized washer and detergent.
Do not direct a pressurized jet of water
towards a cylinder rod scraper seal.
Grease the cylinder rods in contact with the
outside every month.