KUHN ALTOR 4560, Operator'S Manual

Page: 85 / 98

Maintenance and storage
Silo unloader - Straw Spreader
ALTOR 4560
83
6. Checking and adjusting the sections
The sections are mounted with the non-chamfered side
facing the regulating tine for optimum cutting of the
product.
Check regularly that the regulating tines (1) are centered
between the sections. Add or remove shims (2)
(reference A5211690) as required.
To guarantee optimum cutting, the edges of the sections
must be kept sharp. Sharpen or replace them as
necessary..
You can also swap sections around in order to use both
cutting edges of each section.
The two optional regulator combs which can work with
disk sections (3) and (4) are positioned at distance of
less than 10 mm (0’) from the sections. Add or remove
shims (2) (reference A5211690) as required.
Be very careful when replacing sections. You
run a very serious risk of cutting yourself
(between the regulating tines and the
sections).