Corrections at painting
During painting works, there is a risk of fire (cf. to the regulation on combustible liquids)!
Risk of poisoning during painting works!
Risk of injury during grinding work with rotating tools!
After the winter season, it makes sense to remove damages to the paintwork. Please respect the danger
instructions! The respective varnish can be purchased at Kugelmann, Rettenbach.
Welding operations at spreader
During welding operations at the spreader, please make sure that the control system is branched off.
Otherwise, errors at the electronic system and a failure of the control system can possibly result.
Error diagnosis
If the error “sensor disc defective” appears, this may have several causes.
The spreader gets no oil. Hydraulic connections not properly connected.
Conveyor screws are blocked.
Sensor defective, cable torn off.
Check sensor by means of sensor adjustment in service menu. See description k-tronic.
Error “Undersupply disc”.
The hydraulic system does not supply enough oil.
Error “Oversupply disc”
Hand wheel at flow divider block open.
“Undersupply conveyor screw”
The hydraulic system does not supply enough oil.
“Oversupply conveyor screw”
Hand wheel at flow divider block open.
“Low voltage”
Check the board voltage of the carrier vehicle.
Subject to modifications
46
_Maintenance and care, wear parts
Summary of Contents for DUPLEX INOX
