Control system
Two types can be chosen, MCSS 3/4 and k-tronic. A separate instruction for the control system gives you
further details. Here, only operating elements are described.
MCSS 3/4
Switch on the rotating beacon, the headlights and the spreader by means of the red toggle switches. Set the
values for automatic operation of the spreader and manual operation and go to the setting menu in the
selection mode. For details, see the operating instructions for the control system.
Display
Push-button rotating
beacon
Push-button
working headlights
Push-button control
system on/off
Selection button
Spreading
operation / Pause
Left turning knob
middle turning knob
right turning knob
(left spreading density) (spreading width) (right spreading density)
See manual MCSS
Subject to modifications
32
_Operation of spreader
Summary of Contents for DUPLEX INOX
