Connection
Connect the Top and Bottom Enclosures cDynamo SCRA
enclosure is made up of two pieces that easily snap together
around the iPad. Place the iPad device inside the top enclosure.
Be sure the iPad slides to the top and snaps in place.
Slide the bottom enclosure into place by lining up the Lightning
connector on cDynamo and the Lightning port of your iPad device.
Sections 1 and 3 shown in the diagram should snap in place to the inside of
the enclosure, and section 2 should snap to the outside of the enclosure.
When removing the iPad from the top enclosure, pull both sides out
so the case is pushed past the buttons on your iPad device.
USB cable micro-USB cable. Part Number (PN) 1000002547
Power
cDynamo is powered through the iOS device. It only uses power during a
transaction. To charge your iOS device while cDynamo is attached, connect
the optional micro-USB cable (micro-B) to the back of cDynamo, and then
connect the opposite end (USB-A) to the appropriate Apple charging adapter.
Connection - USB Port
Plug the micro-USB connection end of the cable into cDynamo’s micro-
USB port, then attach the USB connection to your Apple charging adapter.
Pass-through micro-USB port allows the iPad device to charge without
disconnecting cDynamo.
Connection - Lightning
Lightning connector supports charge ONLY; iTunes
synchronization is not available.
Mounting
VESA Mount = MIS-D 4”x 4” (100mm x 100mm), Qty 4 - M4 screw threads.
cDynamo makes mobile payments and card reading easier than ever. The
form fitted enclosure is perfect for high traffic merchants, in-flight sales, line-
busting, and pay-at-the-table service. cDynamo delivers an integrated secure
card reader authenticator for magstripe cards with a long smooth swipe
path for excellent first swipe read rates
Major Components
cDynamo
Secure Card Reader Authenticator
made for iPad
Quick Installation Guide
Setup and Installation
MagTek
®
Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 562-546-6800 | f 562-546-6301 | www.magtek.com
MagTek®, MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc.
MAGTEK: Registered to ISO 9001:2015 © Copyright 2022 MagTek, Inc. PN D998200074 rev 50 10/22
173.50
286.56
18.37
D
C
B
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
A
SHEET 1 OF 3
DESIGNED BY
S.SHARMA
0.254
DO NOT SCALE DRAWING
CCA
NA
DRAWN BY
TOLERANCE:
2.540
TITLE:
6/17/2015
ABS
B
SIZE
PROPRIETARY AND CONFIDENTIAL
20
S.SHARMA
FINISH:
.X
ANGLES
CDYNAMO IPAD AIR
DWG REV :
CHECKED BY:
DATE
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MAGTEK. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF MAGTEK IS PROHIBITED.
.XXX
SCALE: 1:4
.XX
MUST BE ROHS COMPLIANT, SEE
EUROPEAN DIRECTIVE 2002/95/EC
DIMENSIONAL UNITS:
2°
DWG NO.
MATERIAL:
0.127
MM
PART NO.
D100003407 21087005
USB A PLUG
RIGHT ANGLE MICRO USB B PLUG
micro-USB port
Front
Back
MagneSafe® secure card reader authenticator (SCRA)
Lightning™ connector
Top enclosure
Bottom enclosure
1
2
3
