Commissioning of spreader
Check all fixtures again. Is the spreader mounted in the right position? Are all pins inserted and secured
correctly?
The rear support legs must be turned upwards or must be removed. The spreading image would deteriorate;
furthermore, it is possible that the support legs touch the ground in case of uneven ground.
Basically, the operation of the machine, the responsibility for care, maintenance and reconditioning is
restricted to skilled personnel.
Never work in the vicinity of the machine in loose clothing. It can get caught in moving parts.
Do not execute any work with the machine operating!
SWITCH OFF THE MOTOR AND REMOVE THE IGNITION KEY!!!
After switching off the machine, tooling/machine parts may continue running!
Do not execute any work between the spreader and the carrier vehicle! Lower the spreader, switch
off the motor and remove the ignition key!
Subject to modifications
Chapter 05_
35
www.kugelmann.com
Summary of Contents for DUPLEX INOX
