Kugelmann Maschinenbau DUPLEX INOX, Operating Instructions Manual, Page: 24 / 50

Requirements as regards the carrier vehicle
The hydraulic system must supply 40l/min. and a pressure of 200 bar. Moreover, it must dispose of a
pressure-free return with a nominal I.D. of at least 18, better would be 22. An electronic drive signal at the
carrier vehicle allows a simple connection to the control system. In case of a speedometer driven
mechanically by means of a speedometer cable, a pulse generator must be mounted on site.
Hydraulic systems with a performance-dependent delivery volume (load sensing) must supply 160l/min.
A PTO hydraulic pump can be supplied optionally if the carrier vehicle does not reach the necessary
delivery volume or the operating pressure.
Standard equipment
A rotating beacon, working headlights, splash guard and a PVC folding roof are part of the standard
equipment of the Kugelmann “Duplex” spreader.
Types of spreading discs
The spreading discs are made exclusively in stainless steel V4A. The standard disc to spread spreading salt
and grit has shorter spreading blades as the spreading disc for pre-wetted salt.
Special equipment, additional equipment,
options
The electrical adjustment of the spreading pattern makes operation more comfortable. From the cabin, the
operator can adjust the spreading range more to the left or right side.
The pre-wetted salt equipment as additional device allows wetting of the spreading material with brine
solution. This helps to save spreading material and to protect the environment.
24
_
Technical data, equipment