Kugelmann Maschinenbau DUPLEX INOX, Operating Instructions Manual

Page: 22 / 50

Manufacturer
Kugelmann Maschinenbau, Gewerbepark 1-3, 87675 Rettenbach, Germany,
Tel. +49 (0)08860/9190-0 Fax: 08860/ 9190-19, is the manufacturer of the truck-mounted spreader “Duplex”.
Machine data
The three-point spreader “Duplex” has a capacity of 0.35 up to 1.85 m³ for dry spreading material. The
spreader has two chambers of the same size. Optionally, the spreading chambers can be partitioned
asymmetrically.
The spreader can be equipped with brine equipment for pre-wetted salt spreading. The volume of the brine
tanks reaches approx. 43% of the spreader volume.
The vehicle hydraulic serves for the drive as long as the performance of the hydraulic pump is sufficient. A
pressure-free return at the carrier vehicle is necessary. Optionally, Kugelmann offers a
PTO hydraulic pump if the hydraulic pump cannot reach the necessary feed rate. The spreader is
completely made of V4A (designation Inox).
The control of the spreader is executed via MCSS 3/4 or via the k-tronic.
22 Technical data, equipment