Kubota ZG222A-AU, Operator'S Manual

Page: 62 / 105

45 PERIODIC SERVICE
6. If the dust or chaff has accumulated air intake area,
clean them completely by pushing down the bottom
clean lever several times.
When using the bottom clean lever, remove the lever
from the bracket.
After cleaning, make sure that the lever is replaced in
place.
B
Checking Tire Pressure
To avoid serious injury:
A
Do not attempt to mount a tire on a rim. This
should be done by a qualified person with the
proper equipment.
A
Always maintain the correct tire pressure.
Inflation pressure in front tires rises quickly
when using compressed air.
Do not inflate tires above the recommended
pressure shown in the Operator's Manual.
A
Do not use tires larger than specified.
B Inflation Pressure
Though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course of
time. Thus, check it and inflate as necessary.
(1) Air intake screen
(2) Engine dust plate
(3) Dust cover
(4) Bottom clean lever (A) "PUSH DOWN"
(B) Bracket
Tire sizes
Recommended Inflation
Max. Pressure
Front
13 x 5.0 - 6,
4PR Rib
270 kPa
(2.8 kgf/cm , 40 psi)
Rear
23 x 10.5 - 12,
4PR Turf
140 kPa
(1.4 kgf/cm , 20 psi)
(1) Ground (A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"