Kubota ZG222A-AU, Operator'S Manual

Page: 38 / 105

21 OPERATING THE MACHINE
STARTING
B
Operator's Seat
To avoid personal injury:
A
Make adjustments to the seat only while the
machine is stopped.
A Make sure that the seat is completely secured
after each adjustment.
A
Do not allow any person other than the driver to
ride on the machine.
C
How to adjust the operator's seat
A Fore-aft adjust
Pull the seat adjusting lever and slide the seat.
A After adjusting the operator's seat, be sure to check to
see that the seat is securely locked.
B Seat Belt
To avoid personal injury:
A Always use the seat belt when the ROPS is
installed.
A
Do not use the seat belt if a foldable ROPS is
down or there is no ROPS.
Adjust the seat belt for proper fit and connect to the
buckle. The seat belt is auto-locking retractable type.
B Hydraulic Lift Control Pedal
The hydraulic lift control pedal is used to raise the mower.
To raise the mower, keep depressing the pedal.
To lower it, release the pedal.
A
Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A Do not operate at slow engine rpm. Move the throttle
lever above 1/2.
A
If noises are heard when implement is lifting after the
hydraulic lift control pedal has been activated, the
hydraulic mechanism is not adjusted properly. Contact
your local KUBOTA Dealer for adjustment.
A
Do not depress the hydraulic lift control pedal
continuously while operating the machine.
1. Adjust the operator's position and
engage the seat belt.
(1) Armrest
(2) Fore-aft adjusting handle
(1) Seat belt
2. Raise the implement.
(1) Hydraulic lift control pedal "DOWN": Release the pedal
"UP": Keep depressing the
pedal