Kubota ZG222A-AU, Operator'S Manual

Page: 54 / 105

37 MAINTENANCE
LUBRICANTS AND FUEL
Note *1 Oil amount when the oil level is at the upper level of the oil level gauge.
*2 KUBOTA original transmission hydraulic fluid
A To prevent serious damage to hydraulic systems, use only KUBOTA genuine fluid or its equivalent.
Place
Capacities
Lubricants
ZG222A-AU ZG227A-AU
Fuel 27 L (7.1 U.S. gals.)
Automobile unleaded or regular gasoline
Unleaded gasoline 87 octane or higher
Engine crankcase 1.8 L (1.9 U.S.qts.)*1 2.0 L (2.1 U.S.qts.)*1
Engine oil: API service
Classification SG, SH, SJ or higher
Above -18
(0 )...SAE10W-30 or 10W-40
Below 0 (32 ).....SAE5W-20 or 5W-30
Transmission case
with filter & hose
Rear axle gear case
(RH &LH)
7.5 L (7.9 U.S.qts.) KUBOTA UDT or SUPER UDT fluid*2
Mower gear box 0.4 L (0.42 U.S.qts.)
SAE90 gear oil
(API service classification: more than GL-3)
Greasing No. of greasing points Capacity Type of grease
Front axle 2 Until grease
overflows Multipurpose EP2 Grease
(NLGI Grade No.2)
Front wheel 2
Front lift arm 2
Parking brake lock pedal 1
Motion control lever
pivot bushing, and
contact position
6
Universal joint 1
Seat adjuster 2
Cable (throttle cable,
mower lift cable, choke
cable)
5
Moderate amount Oil
[MOWER] Until grease
overflows Multipurpose EP2 Grease
(NLGI Grade No.2)
Universal joint 3
Three spindle shafts 3
Belt tension pulley 1
Belt tension pivot 1
Anti scalp roller 4