Kubota M5040, Workshop Manual

Page: 62 / 559

G-40
M5040, M6040, M7040, WSM G GENERAL
Replacing Light Bulb
CAUTION
• Be careful not to drop the bulb, hit anything against the
lamp, apply excess force, and get the lamp scratched. If
broken, glass may cause injury. Pay more attention to
halogen lamps in particular, which have high pressure
inside.
• Before replacing the lamp, be sure to turn off the light and
wait until the bulb cools down, otherwise, you may get
burned.
Q
Head lights
1. While pushing the right and left lock buttons (2), pull and remove
the electrical connector (1).
2. Remove the rubber boot (3).
3. Remove the clamping fixture (4) and take out the bulb (5).
4. Replace with a new bulb and reinstall the head lamp assembly in
the reverse order.
Q
Other lights
1. Detach the lens and replace the bulb.
IMPORTANT
Q
• Be sure to use a new bulb of the specified wattage.
• Never touch the bulb surface (glass) with bare hands.
Fingerprints, for example, may break the bulb.
W1080544
Lubricating Points (CABIN Model)
W1120093
Light Capacity Remark
Head lights 12V, 55 / 60 W (H4)
Hazard lights 12V, 23 W
Turn signal 12V, 21 W
Tail light 12 V, 5 W
Work light (if equipped) 12 V, 35 W Option for ROPS Model
Front work light 12 V, 21 W
Work light
(for outer roof)
12 V, 55 W CABIN Model
Dome light (Room lamp) 12 V, 5 W CABIN Model
(1) Electrical Connector
(2) Lock Button
(3) Rubber Boot (4) Clamping Fixture
(5) Bulb
(1) Door Hinge (2) Rear Window Hinge
KiSC issued 06, 2008 A