Kubota M5040, Workshop Manual

Page: 425 / 559

8-S27
M5040, M6040, M7040, WSM HYDRAULIC SYSTEM
Torsion Bar and Top Link Bracket
1. Visually inspect the DX bushings for signs of wear or damage.
(The DX bushing tends to show concentrated wear.)
2. If the DX bushing is worn beyond the alloy portion ( A ), replace it.
(When installing)
• When press-fitting a new bushing, apply transmission fluid to the
bushing press in position.
• When press-fitting a new bushing of top link bracket, the seam of
bushing face to rear.
• When press-fitting a new bushing of torsion bar, the hole of
bushing face lower to align with grease gallery.
(Reference)
W1026668
Lift arm bushing Alloy thickness ( A )
0.57 mm
0.0224 in.
A : Alloy Thickness
KiSC issued 06, 2008 A