KTM 500 EXC SIX DAYS US, Owner'S Manual

Page: 99 / 132

15 ELECTRICAL SYSTEM
97
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. ( p. 97)
15.11 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 96)
K00157-10
Main work
–
Loosen screw

.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
Info
A change in weight on the vehicle may require a correction of the headlight
range.
–
Tighten screw

.
15.12 Changing the speedometer battery
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 94)
K00122-10
Main work
–
Remove screws

.
–
Pull the speedometer upward out of the holder.
K00123-10
–
Using a coin, turn protection cap

all the way counterclockwise and remove it.
–
Remove speedometer battery

.
–
Insert the new battery with the label facing upward.
Speedometer battery (CR 2430) ( p. 117)
–
Check the O-ring of the protection cap for correct seating.
K00135-10
–
Position protection cap

and turn all the way clockwise using a coin.
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 95)
–
Check the headlight setting. ( p. 96)
–
Set kilometers or miles. ( p. 22)
–
Set the speedometer functions. ( p. 23)
–
Set the clock. ( p. 23)