17
TUNING THE ENGINE
103
17.5
Adjusting the basic position of the shift lever
401950-12
–
Remove screw
with the washers and remove the shift lever
.
401951-10
–
Clean gear teeth
of the shift lever and shift shaft.
–
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Mount and tighten screw
with the washers.
Guideline
Screw, shift lever
M6
14 Nm
(10.3 lbf ft)
Loctite
®
243™
