KTM 500 EXC SIX DAYS US Page 36 Owner'S Manual Download

Page: 36 / 132

PREPARING FOR USE

8.4

Preparing for rides on dry sand

M00999-01

–

Fit a dust cover on the air filter.

Dust protection device for air filter (77206920100)

Info

See the

KTM PowerParts

fitting instructions.

M01000-01

–

Fit a sand cover on the air filter.

Sand protection device for air filter (59006922000)

Info

See the

KTM PowerParts

fitting instructions.

600868-01

–

Clean the chain.

Chain cleaner (

p. 122)

–

Fit the steel sprocket.

Tip

Do not grease the chain.

–

Clean the radiator fins.

–

Straighten bent radiator fins carefully.

8.5

Preparing for rides on wet sand

M01001-01

–

Fit a rain cover on the air filter.

Waterproofing device for air filter (77206921100)

Info

See the

KTM PowerParts

fitting instructions.

600868-01

–

Clean the chain.

Chain cleaner (

p. 122)

–

Fit the steel sprocket.

Tip

Do not grease the chain.

–

Clean the radiator fins.

–

Straighten bent radiator fins carefully.

Summary of Contents for 500 EXC SIX DAYS US





































































































































Search results

Summary of Contents for 500 EXC SIX DAYS US

Reviews:

Related manuals for 500 EXC SIX DAYS US

Brands by name

Popular brands

KTM 500 EXC SIX DAYS US, Owner'S Manual

Search results

Summary of Contents for 500 EXC SIX DAYS US

Reviews:

Related manuals for 500 EXC SIX DAYS US

Brands by name

Popular brands