12
SERVICE WORK ON THE CHASSIS
69
K00146-11
(EXC US)
–
Position the collar bushings, and mount and tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
M01024-11
(EXC Six Days US)
–
Position collar bushings between the spoiler and radiator shield.
–
Mount and tighten screws
with washers.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
S00460-10
–
Plug in connector
of the fuel pump.
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve.
–
Lubricate the O-ring and connect plug-in connection
of the fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust system.
Finishing work
–
Mount the seat. (
12.35
Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. (
12.36
Cleaning the chain
Warning
Danger of accidents
Oil or grease on the tires reduces their grip.
–
Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents
Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
