KTM 50 SX MINI 2010 Page 73 Owner'S Manual Download

Page: 73 / 85

TECHNICAL DATA - CHASSIS

Frame

Central tube frame of chrome molybdenum steel tubing, powder-
coated

Fork

Marzocchi

Shock absorber

WP Suspension

3614 BAEM

Suspension travel (50 SX)

Front

185 mm (7.28 in)

Rear

185 mm (7.28 in)

Suspension travel (50 SX Mini)

Front

110 mm (4.33 in)

Rear

171 mm (6.73 in)

Fork offset

14 mm (0.55 in)

Brake system

Front

Disc brake, brake caliper, fixed

Rear

Disc brake, brake caliper, fixed

Brake disc diameters

Front

160 mm (6.3 in)

Rear

140 mm (5.51 in)

Brake discs - wear limits

Front

2.2 mm (0.087 in)

Rear

2.2 mm (0.087 in)

Tire air pressure off road

Front

1.0 bar (15 psi)

Rear

1.0 bar (15 psi)

Secondary drive ratio (50 SX)

11:40

Secondary drive ratio (50 SX Mini)

10:42

Chain

1/2 x 3/16”

Rear sprockets available

38, 39, 40, 41, 42

Steering head angle (50 SX)

66°

Steering head angle (50 SX Mini)

67.4°

Wheelbase (50 SX)

1,032 mm (40.63 in)

Wheelbase (50 SX Mini)

914 mm (35.98 in)

Seat height unloaded (50 SX)

684 mm (26.93 in)

Seat height unloaded (50 SX Mini)

558 mm (21.97 in)

Ground clearance unloaded (50 SX)

252 mm (9.92 in)

Ground clearance unloaded (50 SX Mini)

184 mm (7.24 in)

Weight without fuel, approx. (50 SX)

39.8 kg (87.7 lb.)

Weight without fuel, approx. (50 SX Mini)

39.0 kg (86 lb.)

16.1

Tires

Validity

Front tire

Rear tire

(50 SX)

60/100 - 12 36M TT

Pirelli SCORPION MX Mid Soft 32 NHS

2.75 - 10 37J TT

Pirelli SCORPION MX Mid Soft 32 NHS

(50 SX Mini)

2.50 - 10 33J TT

Pirelli SCORPION MX Mid Soft 32 NHS

2.75 - 10 37J TT

Pirelli SCORPION MX Mid Soft 32 NHS

Additional information is available in the Service section under:
http://www.ktm.com

Summary of Contents for 50 SX MINI 2010






















































































Search results

Summary of Contents for 50 SX MINI 2010

Reviews:

Related manuals for 50 SX MINI 2010

Brands by name

Popular brands

KTM 50 SX MINI 2010, Owner'S Manual

Search results

Summary of Contents for 50 SX MINI 2010

Reviews:

Related manuals for 50 SX MINI 2010

Brands by name

Popular brands