MAINTENANCE WORK ON CHASSIS AND ENGINE
30
300743-10
–
Position the handlebar with handlebar clamps.
–
Mount and tighten screws
.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)
–
Position the fuel tank breather
.
300732-12
–
Position the brake caliper, fit and tighten the screws
with washers.
Guideline
Screw, front brake caliper
M8
20 Nm
(14.8 lbf ft)
Loctite
®
243™
300731-12
–
Position the brake line. Put the clamp on, and mount and tighten screws
.
–
Install the front fender. (
p. 31)
–
Install the start number plate. (
p. 31)
–
Install the front wheel.
x
(
p. 45)
–
Check that the wiring harness, Bowden cables and brake line have freedom of
movement and are routed correctly.
–
Check play of steering head bearing. (
p. 25)
9.21
Greasing the steering head bearing
x
400563-01
–
Remove the lower triple clamp.
x
(
p. 28)
–
Install the lower triple clamp.
x
(
p. 29)
9.22
Dismounting the front fender
700479-10
–
Remove screws
. Remove the front fender.
Summary of Contents for 50 SX MINI 2010
Page 1: ...OWNER S MANUAL 2010 50 SX 50 SX Mini Art no 3211477en ...
Page 2: ......
