KTM 50 SX MINI 2010 Page 30 Owner'S Manual Download

Page: 30 / 85

MAINTENANCE WORK ON CHASSIS AND ENGINE

9.19

Removing the lower triple clamp

–

Remove the fork legs.

(

p. 26)

–

Dismount the front fender. (

p. 30)

300736-10

–

Remove the fuel tank breather



–

Remove screws



–

Remove the handlebar clamp.

–

Remove the handlebar and lay it to one side.

Info

Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.

300737-10

–

Remove screws



–

Take off the handlebar support.

300738-11

–

Remove nut



–

Take off the upper triple clamp.

300739-10

–

Remove nut



300740-10

–

Remove protector ring



–

Remove the lower triple clamp with the steering stem.

–

Remove the upper steering head bearing.

Summary of Contents for 50 SX MINI 2010






















































































Search results

Summary of Contents for 50 SX MINI 2010

Reviews:

Related manuals for 50 SX MINI 2010

Brands by name

Popular brands

KTM 50 SX MINI 2010, Owner'S Manual

Search results

Summary of Contents for 50 SX MINI 2010

Reviews:

Related manuals for 50 SX MINI 2010

Brands by name

Popular brands