KTM 50 SX MINI 2010 Page 51 Owner'S Manual Download | Manualshive

Page: 51 / 85

background image

MAINTENANCE WORK ON CHASSIS AND ENGINE

49

9.67

Checking the antifreeze and coolant level

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not open the radiator, radiator hoses or other cooling system components when the engine is hot. Allow the engine and
cooling system to cool down. In case of burns, rinse immediately with lukewarm water.

Warning

Danger of poisoning

Coolants are poisonous and a health hazard.

–

Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and
contact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor
immediately. Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.

Info

Carry out this work with a cold engine.

700510-01

–

Stand the motorcycle upright on a horizontal surface.

–

Remove radiator cap



.

–

Check the antifreeze of the coolant.

−

25…

−

45 °C (

−

13…

−

49 °F)

» If the antifreeze of the coolant does not meet specifications:

–

Correct the antifreeze of the coolant.

400243-10

–

Check the coolant level in the radiator.

Coolant level



above the radiator fins

10 mm (0.39 in)

» If the coolant level does not meet specifications:

–

Correct the coolant level.

Alternative 1

Coolant (

p. 76)

Alternative 2

Coolant (mixed ready to use) (

p. 76)

–

Mount the radiator cap.

9.68

Checking the coolant level

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not open the radiator, radiator hoses or other cooling system components when the engine is hot. Allow the engine and
cooling system to cool down. In case of burns, rinse immediately with lukewarm water.

Warning

Danger of poisoning

Coolants are poisonous and a health hazard.

–

Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and
contact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor
immediately. Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.

Info

Carry out this work with a cold engine.

«
...
49
50
51
52
53
...
»

Summary of Contents for 50 SX MINI 2010






















































































Reviews:

No comments

Related manuals for 50 SX MINI 2010

Brand: Dayi Motor Pages: 15

Brand: MadStad Engineering Pages: 2

Brand: Big Bike Parts Pages: 2

Brand: Happy Trails Pages: 4

Brand: R&G Pages: 2

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 100

Compu-Fire 55120 32

Brand: PerTronix Pages: 3

Brand: DYNATEK Pages: 6

Brand: Ossa Pages: 72

Brand: Kinderkraft Pages: 36

Brand: Malaguti Pages: 303

Brand: Petzl Pages: 3

Brand: Petzl Pages: 8

Brand: Petzl Pages: 17

Brand: Petzl Pages: 24

MS3 - CATALOGUE

Brand: HYOSUNG Pages: 104

Brand: MT Helmets Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands