MAINTENANCE WORK ON CHASSIS AND ENGINE
48
400694-01
–
Briefly strike each spoke with the blade of a screwdriver.
Info
The frequency of the tone depends on the spoke length and diameter.
If you hear different tone frequencies from spokes of the same length and
thickness, this is an indication that the spoke tension differs.
You should hear a high note.
» If the spoke tension differs:
–
Correct the spoke tension.
x
–
Check the spoke torque.
Guideline
Spoke nipple
M3.5
3 Nm (2.2 lbf ft)
Torque wrench with various accessories in set (58429094000)
9.64
Removing the seat
300611-10
–
Open quick release
and raise the rear of the seat.
–
Pull back the seat and remove it.
9.65
Mounting the seat
300612-10
–
Hook the seat onto screw
and lower the seat at the rear while pushing it forward.
Projection
hooks into the fuel tank.
300611-11
–
Close quick release
.
9.66
Cooling system
700509-01
The water pump
in the engine forces the coolant to flow.
The pressure resulting from the warming of the cooling system is regulated by a valve
in the radiator cap
. The specified coolant temperature is therefore permissible with-
out danger of function problems.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the cool-
ing effect.
Summary of Contents for 50 SX MINI 2010
Page 1: ...OWNER S MANUAL 2010 50 SX 50 SX Mini Art no 3211477en ...
Page 2: ......
